Skip to content
Milwaukee - µS Meter-Kalibrierungsflüssigkeit M10030

Milwaukee - µS Meter-Kalibrierungsflüssigkeit M10030

  • Basis for accurate conductivity measurement
  • Factory calibrated with potassium chloride in deionized water for analytical purposes
  • Packaging sealed against light and air
  • ideal for on-site calibration
  • Simply open. Insert tester or electrode into the bag and calibrate
  • Each bag has a temperature diagram of the actual µS / cm value printed at different temperatures
  • Minimum shelf life 5 years
Sold out
1,90€ - 1,90€
1,90€
1,90€ - 1,90€
1,90€

incl. German value added tax plus Shipping costs
For cross-border deliveries, the rate of the respective EU country applies.

Lieferzeit:

DE: 2-3 working days (depending on weather conditions)
EU: 3-5 working days (depending on weather conditions)

Dieses Bild dient nur als Beispiel. Die tatsächliche Pflanze kann in Form und Farbe vom Bild abweichen.

Description

Milwaukee - µS Meter-Kalibrierungsflüssigkeit M10030

Milwaukee - µS Meter-Kalibrierungsflüssigkeit M10030

Product information "Milwaukee - µS Meter Calibration Fluid M10030"

The performance of conductivity electrodes is affected by residue buildup and aging. M10030 is a laboratory grade 12880 µS/cm conductivity calibration fluid made with potassium chloride solution that you can use to recalibrate your conductivity meter or tester. Consult your meter or tester manual to find the correct calibration standard for your meter.
Conductivity readings are affected by temperature. To help you, a table showing the actual µS/cm value at different temperatures is printed on each bag.
Milwaukee conductivity solutions are labeled with the batch number and expiration date and packaged in an airtight, tamper-evident sachet.

Characteristics

  • Basis for an accurate conductivity measurement.
  • Factory calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use according to ISO 3696/BS3978.
  • sealed against light and air.
  • ideal for on-site calibration
  • simply open, put the tester or electrode in the bag and calibrate
  • Each 20 mL bag is labeled with lot number and expiration date.
  • A temperature table with the current µS/cm value at different temperatures is printed on each bag.
  • 5 years expiry date.