Milwaukee   Leitwertmeßgerät EC 60

Product information "Milwaukee conductivity meter EC 60"

The conductivity meter is waterproof and floats. The electrode is made of stainless steel and is therefore very durable with a very fast response time. Calibration (basic setting) is very simple. Pour the included liquid into a small glass. After reading the instructions, switch on the calibration, immerse the electrode in the liquid, wait until the display shows the correct value, and you're done. The EC 60 conductivity meter has a very large measuring range, from 0 to 20,000µS (20mS), the display is in 100µS increments.
To measure, simply remove the lid and place the electrode in the liquid and wait until the display stops. Temperature compensation is automatic. To ensure a long service life, the electrode should be rinsed with distilled or demineralized water and can then be stored dry.
To avoid incorrect measurements, a battery level indicator is shown on the display. If you forget to turn the device off, it will switch itself off after 8 minutes. And if the electrode is actually defective, it can be easily replaced.

Scope of delivery:
Stable storage box
Conductivity meter
Instructions in German and English
Calibration fluid
Warranty card
Quality check

Technical data:
EC measuring range: 0.00 to 20.00 mS/cm
TDS measuring range: 0.00 to 10.00 ppt
Temperature measuring range: 0.0 to 60.0°C / 32.0 to 140.0°F
Resolution EC: 0.01 mS/cm (100µS)
Resolution TDS: 0.01 ppt
Temperature resolution: 0.1°C / 0.1°F
Accuracy EC: 2% deviation over the full measuring range
Accuracy TDS: 2% deviation on the full measuring range
Temperature accuracy: ±0.5°C / ±1°F
Calibration: automatic, 1 point (EC12.88)
Temperature compensation: automatic
Electrode: Mi59P (replaceable)
Working range: 0 to 50°C / 32 to 122°F; max. relative humidity 100%
Battery Type: 4 x 1.5V button cell LR44 (included)
Battery life: approx. 100 operating hours
Automatic shutdown: after 8 minutes of non-use
Dimensions: length 20cm, diameter 3.8cm
Weight: 100g